XPARTCO WH01X27954 Washer Lid Switch (old style) AP7015047

XPARTCO WH01X27954 Washer Lid Switch (Old Style) – Compatible with GE, Hotpoint, and RCA Washers

Product Description

Restore reliable washer operation with the XPARTCO WH01X27954 Washer Lid Switch (Old Style). This high-quality replacement detects whether the washer lid is closed, allowing safe operation during wash and spin cycles. A broken or faulty switch can cause the washer not to start, stop mid-cycle, or fail to spin. Replacing it with this durable XPARTCO switch restores normal functionality and safety performance. Old-style GE lid switch (does not require harness replacement).

Replaces Part Numbers

WH08X32697, WH01X27954, WH08X31577, WH01X24114, WH01X26114, 290D1580P001, 290D1580P004, 290D1580P002, 290D1580P003, WH08X31577, AP7015047, PS16554755.

Compatibility

This replacement lid switch (old style) fits select GE, Hotpoint, and RCA top-load washers.

Example compatible models include (but are not limited to): GE GTW220ACK1WW GTW220ACK2WW GTW220ACK3WW GTW220ACK4WW GTW220ACK5WW GTW220ACK6WW GTW220ACK7WW GTW220ACKWW GTW330ASK0WW GTW330ASK1WW GTW330ASK2WW GTW330ASK3WW GTW330ASK4WW GTW330ASKWW GTW335ASN0WW GTW335ASN2WW GTW335ASNWW GTW460AMJ0WW GTW460AMJ1WW GTW460AMJ2WW GTW460AMJ3WW GTW460AMJ4WW GTW220ACK4WW GTW220ACK5WW GTW220ACK6WW GTW220ACK7WW GTW220ACKWW GTW330ASK0WW GTW330ASK1WW GTW335ASN0WW.

Always verify your washer’s model number before ordering. Contact our support team if you’re unsure.

✅ Key Features

• 🔄 Aftermarket Replacement – Built to match OEM safety and electrical performance

• 🚪 Lid-Safety Function – Prevents washer from running when the lid is open

• 💰 Budget-Friendly Fix – Provides reliable performance at a lower cost than OEM parts

• 🛠️ Plug-and-Play Design – Harness for quick connection

• 🛡️ Fixes Common Issues – Solves no-start, mid-cycle stop, or spin interruption problems

📐 Product Specification

• Part Number: WH01X27954 (Old Style)

• Component Type: Washer Lid Switch Assembly

• Material: Reinforced plastic housing with electrical harness

• Mounting: Direct-fit under top panel latch area

• Operating Conditions: Designed for humid, high-vibration environments

• Compliance: Built to OEM-equivalent quality standards (not OEM)

🛠️ Installation Notes

Tools Needed: Phillips screwdriver, nut driver

⚠️ Safety First: Always unplug the washer before performing repairs to prevent electrical shock.

Steps:

1. Unplug the washer and open the top panel.

2. Remove screws securing the old lid switch assembly.

3. Disconnect the wiring harness from the old switch.

4. Install the new XPARTCO WH01X27954 switch in the same location.

5. Reconnect wiring, secure the switch, and close the panel.

6. Restore power and test washer operation.

⏱️ Time Required: 15–20 minutes