1 4

XPARTCO

XPARTCO WE4X750 Gas Dyer Igniter Replaces 5303937186, 4391996, 279311

XPARTCO WE4X750 Gas Dyer Igniter Replaces 5303937186, 4391996, 279311

$13.75 USD
$26.20 USD $13.75 USD
Sale Sold out
Shipping calculated at checkout.

XPARTCO WE4X750 Gas Dryer Igniter

The XPARTCO WE4X750 is an aftermarket replacement flat igniter for select GE, Hotpoint, Whirlpool, Maytag, Frigidaire and other gas dryers, replacing GE part WE4X750 and cross-referencing 5303937186 and 4391996. The igniter sits in the burner assembly. It heats up when electrical current passes through it and lights the gas so the dryer can heat. When it wears out or stops glowing, the dryer may run but not heat.

Check your model number before ordering, as gas dryers use several different igniters.

Quick Answer

The XPARTCO WE4X750 Gas Dryer Igniter replaces a worn or non-glowing igniter on a compatible gas dryer from GE, Hotpoint, Whirlpool, Maytag, Frigidaire and other brands. Replaces WE4X750, WE04X0750, 5303937186 and 4391996. Classic symptom: the dryer runs but does not heat, and the igniter doesn't glow. Other parts can cause the same symptom.

Common Problems This Part Fixes

  • Gas dryer not heating
  • Igniter not glowing
  • Worn igniter that no longer lights the burner

Cross Reference Information

Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.

Replaces Part Numbers

This dryer igniter directly replaces the following part numbers:

WE4X750, WE04X0750, 276846, AGE25807, AH268196, AP2042796, EA268196, PD00001123, PS268196, 5303937186, 08001685, 08010845, 08015456, 1036069, 3281151, 5303281151, 8001685, F000134211, F134211-000, F134211000, F139743-000, F139743000, G139743-000, AFR17339, AH900236, AP3674313, EA900236, PD00000539, PS900236, Q000622141, Q622141, WQ622141, 4391996, 14211282, 3-4970, 3018, 304970, 41-311, 41-590, 4391996VP, AH373025, AP3109449, AWP39344, DE351, DE363, EA373025, K35-166, K35-455, PD00002514, PS373025

Gas dryers use several different igniters, and they are not interchangeable by number alone. If your old igniter shows a different number, contact our support team and we'll check whether it matches.

Compatibility

This igniter is listed for select GE, Hotpoint, Whirlpool, Maytag, Frigidaire and other gas dryers. Example GE and Hotpoint models that use WE4X750:

  • GE DBL333GA0CC, DCL333GA0AA, DVL223GA0WW, DBL333GY0WW
  • GE DCB330GB0KC, DCD330GY1AC, DH43GW0WW
  • Hotpoint NVL333GY0AA

Note: The models above are a small sample of the roughly 36 that retailers list for WE4X750, not a full list, and the example models are GE and Hotpoint. For other brands, confirm fit by your igniter's part number (such as 4391996 or 5303937186) and your model. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering.

Key Features

  • Aftermarket replacement for the GE WE4X750 flat gas dryer igniter
  • Lights the gas burner so the dryer can heat
  • Installs in the dryer burner assembly
  • Replaces the earlier GE number WE04X0750 and cross-references 5303937186 and 4391996

Product Specifications

Part Number XPWE4X750
OEM Part Number WE4X750, 5303937186, 4391996
Part Type Gas Dryer Igniter (Flat)
Condition Aftermarket Replacement
Quantity 1 Igniter
Application Select GE, Hotpoint, Whirlpool, Maytag, Frigidaire & Other Gas Dryers

Installation Notes

⚠️ Disconnect Power And Shut Off The Gas Before Installing Unplug the dryer and shut off the gas supply before you begin, and wear work gloves. Remove the panel to reach the burner assembly, note how the igniter and its wiring connect, and remove the old igniter. Handle the new igniter carefully and install it in the same position. Reconnect the wiring, restore power and gas, and test the dryer. If you smell gas at any point, stop and contact a qualified technician.

Frequently Asked Questions

My gas dryer runs but doesn't heat. Is this the part I need?

It can be, if the igniter has worn out and no longer glows. Other parts, such as the gas valve coils or thermal fuse, can cause the same symptom, so confirm the igniter is the problem before replacing it.

Is this an OEM or aftermarket part?

This is an aftermarket replacement from XPARTCO, made to replace GE part WE4X750. If you specifically need a genuine GE part, contact our support team.

Can I use a different gas dryer igniter?

Not by number alone. Gas dryers use several different igniters. Match the part number and your model number, or contact our support team and we'll check for you.

Will this fit my dryer?

It is listed for select gas dryers from GE, Hotpoint, Whirlpool, Maytag, Frigidaire and other brands, but the model list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.

Shop With Confidence

A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.

✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
View full details