XPARTCO
XPARTCO 6602-001655 Dryer Drum Belt for Samsung AP4373659, PS4133825
XPARTCO 6602-001655 Dryer Drum Belt for Samsung AP4373659, PS4133825
Couldn't load pickup availability
XPARTCO 6602-001655 Dryer Drum Belt
The XPARTCO 6602-001655 is an aftermarket replacement dryer drum belt compatible with select Samsung and Kenmore dryers. The drum belt wraps around the outside of the dryer drum, loops around the motor pulley and idler pulley, and drives the drum to rotate during every drying cycle. Without a functioning belt, the drum cannot spin and clothes will not tumble or dry.
Made from premium neoprene rubber reinforced with polyester cords, this 5-rib belt measures 92 inches long x 5/16 inch wide and is built to resist cracking, stretching, and wear under the high heat and repeated tension cycles of daily dryer use. It is a direct drop-in replacement for OEM part numbers 6602-001655 and 6602-001314, and installs in 30–45 minutes with basic hand tools.
Quick Answer
The XPARTCO 6602-001655 Dryer Drum Belt fixes dryers where the drum is not spinning, clothes are not tumbling, or a thumping/squealing noise is coming from the dryer during operation. It drives the drum via the motor and idler pulleys. Compatible with select Samsung and Kenmore dryers. Measures 92" L x 5/16" W with 5 ribs and 4 grooves.
Common Problems This Part Fixes
- Dryer drum not spinning — motor runs but drum stays still
- Clothes not tumbling during the drying cycle
- Thumping, squealing, or slapping noise during operation
- Dryer runs but produces no heat because drum is stationary
- Visible broken or frayed belt pieces found inside the dryer cabinet
- Dryer shuts off shortly after starting due to drum not rotating
Replaces Part Numbers
This drum belt directly replaces the following OEM and cross-reference part numbers:
6602-001655, 6602-001314, 5PH2337, LB1655, ASM874658, PD00002012, EAP2407938, AP4373659, PS4133825.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drum belt is compatible with select dryers from the following brands:
- Samsung dryers (gas and electric)
- Kenmore / Sears dryers (select models)
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
- Drives the dryer drum via the motor pulley and idler pulley for smooth, consistent tumbling every cycle
- 92" length x 5/16" width — 5-rib, 4-groove design for a secure, slip-free grip on the pulleys
- Made from premium neoprene rubber with polyester cord reinforcement — resists cracking, stretching, and heat damage
- Direct replacement for OEM part numbers 6602-001655 and 6602-001314 — no modification required
- Aftermarket replacement built to OEM-equivalent quality standards
- DIY-friendly repair — installs in 30–45 minutes with basic hand tools
- Often replaced together with the idler pulley (DC93-00634A) and drum rollers (DC97-16782A) for a complete drum drive repair
Product Specifications
| Part Number | 6602-001655 |
| Part Type | Dryer Drum Drive Belt |
| Condition | Aftermarket Replacement |
| Application | Gas and Electric Dryers |
| Length | 92 inches |
| Width | 5/16 inch |
| Height | 1/8 inch |
| Ribs | 5 ribs, 4 grooves |
| Material | Neoprene rubber with polyester cord reinforcement |
| Color | Black |
| Compatible Brands | Samsung, Kenmore |
| Often Replaced With | DC93-00634A Idler Pulley, DC97-16782A Drum Rollers |
Installation Notes
Frequently Asked Questions
Will the 6602-001655 fit my Samsung or Kenmore dryer?
This belt is compatible with select Samsung and Kenmore dryers. Use the model search above to verify your model number, or contact our support team before ordering.
What does the dryer drum belt do?
The drum belt wraps around the outside of the dryer drum and connects to the motor pulley and idler pulley. As the motor spins, it drives the belt which causes the drum to rotate, tumbling your clothes through the heated air to dry them. A broken or worn belt means the drum cannot spin.
How do I know if my drum belt is broken?
The most obvious sign is that the dryer motor runs and you can hear it humming, but the drum does not spin. You may also hear a thumping or slapping sound if the belt is slipping or partially broken. Opening the dryer cabinet and visually inspecting the belt will confirm if it is broken, frayed, or stretched.
Should I replace the idler pulley and drum rollers at the same time?
Yes — since you need to disassemble the dryer to replace the belt anyway, it is highly recommended to also inspect and replace the idler pulley (DC93-00634A) and drum support rollers (DC97-16782A) at the same time. These parts wear at a similar rate and replacing all three together prevents having to disassemble the dryer again in the near future.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is made from premium neoprene rubber with polyester cord reinforcement to match the dimensions and performance of the original belt.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
Share
