XPARTCO
WH13X26535 Washer Water Valve AP6892695, WH13X24386
WH13X26535 Washer Water Valve AP6892695, WH13X24386
Couldn't load pickup availability
XPARTCO WH13X26535 Washer Water Valve
The XPARTCO WH13X26535 is an aftermarket replacement water inlet valve assembly for GE top-load washers, and also fits select Hotpoint, Haier, Monogram, and Café models. This valve controls the flow of hot and cold water into the tub during the fill portion of the cycle, ensuring each wash uses the correct amount of water at the right temperature blend. It's housed in durable gray plastic.
Common failure causes include mineral or sediment buildup inside the valve body, a burned-out internal solenoid coil, and general wear over years of use — five years is a commonly cited service life before this valve starts to show problems. A failing valve produces a clear set of symptoms: the washer not filling properly, water continuing to fill or drip even when the washer is turned off, or leaking near the valve area. It directly replaces WH13X26535, WH13X24386, 4931303, WH13X24392, AP6892695, AGE26261, EAP12726769, OEM20678094, PD00052736, PS12726769
Quick Answer
The XPARTCO WH13X26535 Washer Water Valve fixes GE top-load washers that aren't filling properly, are overfilling, or have water slowly dripping into the tub even when the washer is off. Housed in gray plastic. Replaces WH13X26535, WH13X24386, 4931303, WH13X24392, AP6892695, AGE26261, EAP12726769, OEM20678094, PD00052736, PS12726769. This replacement valve does not include a thermistor or gasket — if your old valve has a thermistor mounted in front of the solenoids, you'll need to transfer it (with its gasket) to the new valve. Also not the same as the similarly-numbered WH13X26534, which is a separate valve for other GE/Hotpoint models.
Common Problems This Part Fixes
- Washer not filling with water properly
- Washer overfilling
- Water slowly dripping or leaking into the tub even when the washer is turned off
- Leaking near the valve connections
- No hot water reaching the tub, or no cold water reaching the tub
- Cycle stalling at the fill step and never advancing to wash
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer water inlet valve directly replaces the following OEM and cross-reference part numbers:
WH13X26535, WH13X24386, 4931303, WH13X24392, AP6892695, AGE26261, EAP12726769, OEM20678094, PD00052736, PS12726769
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This water valve is compatible with select GE top-load washers, and also fits select Hotpoint, Haier, Monogram, and Café washers built on the GE platform, spanning model series GTW460, GTW465, GTW485, GTW490, GTW500, GTW525, GTW540, and VTW540, including specific model numbers such as 5TW4207ST0WS, 5TW4307SW0WS, ETW485ASW0WB, GTW460AMJ0WW, GTW460AMJ1WW, and GTW460AMJ2WW.
Note — thermistor transfer required, and not the same as WH13X26534: This valve does not include a thermistor or the rubber gasket that seats it. If your original valve has a thermistor mounted in front of the solenoids, you must transfer that thermistor and its gasket onto this new valve during installation. Separately, this part is not the same as the similarly-numbered WH13X26534, a distinct valve used on other GE/Hotpoint models with its own cross-reference set (PS12726768, AP6891106). Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
- Aftermarket replacement water inlet valve — controls hot and cold water flow into the tub
- Resolves "won't fill properly," "overfilling," and "dripping into the tub when off" symptoms caused by valve failure
- Durable gray plastic housing
- Direct drop-in replacement — matches the original mounting and hose connections
- Replaces WH13X26535, WH13X24386, 4931303, WH13X24392, AP6892695, AGE26261, EAP12726769, OEM20678094, PD00052736, PS12726769
- Compatible with GE, Hotpoint, Haier, Monogram, and Café top-load washers
- Aftermarket replacement built to OEM-equivalent quality standards
- Moderate DIY repair, typically 30 to 60 minutes
Product Specifications
| Part Number | WH13X26535 |
| OEM Part Number | WH13X26535 |
| Part Type | Washer Water Inlet Valve |
| Condition | Aftermarket Replacement |
| Application | Top-Load Washers |
| Housing Material | Gray plastic |
| Includes Thermistor/Gasket | No — transfer from old valve if equipped |
| Repair Difficulty | Moderate — 30 to 60 minutes |
| Quantity | 1 valve |
| Compatible Brands | GE, Hotpoint, Haier, Monogram, Café |
Installation Notes
Frequently Asked Questions
Does this valve come with the thermistor?
No. This valve no longer comes with the rubber gasket or thermistor that some GE washers use, mounted directly in front of the solenoids. If your old unit has one, you'll need to remove it from the old valve, along with its gasket, and transfer it onto this new valve during installation.
Water has been slowly leaking into my tub even when the washer is off. Is that this valve?
Yes, this is a documented cause. One customer traced over a year of slow leaking directly to this valve's thermistor O-ring, which is known to degrade over time and let water seep through even when the washer isn't running. Replacing the valve (and transferring a good thermistor and gasket if your model uses one) resolves this type of slow leak.
Is this the same as WH13X26534?
No, these are two separate GE valve part numbers with different cross-reference sets, despite the similar numbering. Always confirm the exact part number from your washer's parts diagram or the sticker on your old valve rather than assuming based on a close number match.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the solenoid design, housing, and connection type of the original WH13X26535 valve used in compatible GE, Hotpoint, Haier, Monogram, and Café top-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
Share
