XPARTCO
WE12X10014 Dryer Drum Belt AP4379804, PS2350043, WE12X82
WE12X10014 Dryer Drum Belt AP4379804, PS2350043, WE12X82
Couldn't load pickup availability
XPARTCO WE12X10014 Dryer Drum Belt
87-inch, 4-rib drum drive belt for select GE, Hotpoint, RCA and Kenmore dryers.
Product Overview
The XPARTCO WE12X10014 Dryer Drum Belt connects the dryer motor pulley to the drum so the drum can rotate during the drying cycle.
This quality aftermarket replacement is designed for dryers that use the common GE-style 87-inch, 4-rib drive belt.
Quick Answer
WE12X10014 is an approximately 87 inch long × 1/4 inch wide dryer belt with 4 ribs/ridges. It replaces several earlier GE belt numbers including WE12X42 and WE12X82.
Common Problems This Part May Fix
- Dryer drum does not turn
- Motor runs but drum stays still
- Belt is broken, stretched, glazed, or frayed
- Squealing or slapping noise from a damaged belt
- Dryer will not tumble properly
Replaces and Cross-References
Cross-reference numbers are provided for identification. XPARTCO is an aftermarket replacement brand and is not manufactured by GE Appliances.
Compatibility
Fits select GE, Hotpoint, RCA and Kenmore dryers. Compatible model examples include:
Important: This is only a partial compatibility list. Verify the complete dryer model number and original belt part number before ordering.
Key Features
- Quality XPARTCO aftermarket replacement
- Approx. 87 inches long
- Approx. 1/4 inch wide
- 4-rib / 4-ridge drive surface
- Transfers motor power to dryer drum
- Fits many GE-built dryer platforms
Product Specifications
| XPARTCO Part Number | WE12X10014 |
| Part Type | Dryer Drum Drive Belt |
| Length | Approx. 87 in. |
| Width | Approx. 1/4 in. |
| Ribs / Ridges | 4 |
| Condition | New |
| Part Quality | Aftermarket Replacement |
| Package Quantity | 1 Belt |
Installation Notes
- Unplug the dryer before service.
- Access the drum and release belt tension from the idler pulley.
- Remove the old belt and inspect the idler pulley and motor pulley for wear or debris.
- Install the new belt with the ribbed side against the drum where specified by the dryer design.
- Route the belt around the motor pulley and idler exactly as shown in the appliance service diagram.
- Rotate the drum by hand to confirm smooth tracking before reassembly.
Diagnostic tip: A broken belt can result from a seized idler pulley, worn drum bearing/glides, or an obstructed drum. Inspect related components before installing the new belt.
Frequently Asked Questions
How long is WE12X10014?
It is approximately 87 inches long and 1/4 inch wide.
How many ribs does this belt have?
It has 4 ribs/ridges on the drive surface.
Does it replace WE12X42 and WE12X82?
Yes. WE12X10014 is commonly listed as the replacement for those earlier belt numbers.
Is this a Genuine GE OEM belt?
No. This listing is for a quality XPARTCO aftermarket replacement designed for compatible GE-built dryers.
Shop With Confidence
Verify the complete dryer model number before ordering. Our compatibility team can help confirm whether XPARTCO WE12X10014 is correct for your dryer.
Share
