XPARTCO
W10861225 Dryer Door Handle W10714516, AP5999398, AWP42134
W10861225 Dryer Door Handle W10714516, AP5999398, AWP42134
Couldn't load pickup availability
XPARTCO W10861225 Dryer Door Handle — XPARTCO Aftermarket Replacement
The XPW10861225 is an XPARTCO aftermarket dryer door handle that replaces the Whirlpool W10861225. This handle is used across a wide range of Whirlpool-manufactured dryer platforms, including models sold under the Whirlpool, Maytag, Kenmore, Crosley, Amana, Roper, and Inglis brands. Because Whirlpool manufactures dryers for all of these brands on shared platforms, the same door handle part number covers electric and gas models across all of them.
The Whirlpool WED and WGD series (such as WED4815EW, WGD4815EW, WED7300DW, WGD7000DW), the Maytag MED and MGD series (such as MEDC465HW, MEDC555DW, MGDC465HW), the Kenmore 110 series, and the Amana NED series all share the same front-load door panel that accepts this handle. The handle is a white plastic snap-in component — no tools, no screws, and no disassembly needed. It clicks into the mounting slot on the door panel in under a minute.
Quick Answer
Will This Fix Your Dryer?
If your dryer door handle is cracked, broken, wobbly, or pulls completely out of the door, the XPW10861225 is a direct snap-in replacement. This handle fits Whirlpool, Maytag, Kenmore, Crosley, Amana, Roper, and Inglis dryers that use the W10861225 or its predecessor W10714516. Verify your model number is compatible, pull the old handle out, and press the new one into the same slot until it clicks.
Common Symptoms
- Handle pulls out of the door when opening the dryer
- Visible crack or break in the handle plastic
- Handle rocks or wobbles in its mounting slot
- Door won't close — handle cannot hold the door shut
- Snap tab broken off inside the door panel
Cross Reference Information
The XPW10861225 replaces the following OEM and distributor part numbers. If any of these numbers match the handle installed in your dryer or appear in a parts lookup for your model, this XPARTCO replacement is the correct fit.
COMPATIBILITY
This XPARTCO handle fits Whirlpool, Maytag, Kenmore, Crosley, Amana, Roper, and Inglis dryers that use the W10861225 door handle. Both electric and gas models on the same platform share this handle. Always verify your model number before ordering.
Sample compatible models: WED4815EW1, WGD4815EW2, WED7300DW1, WGD7000DW1, WED7000DW1, MEDC555DW2, MEDC465HW1, MGDC465HW1, NED4655EW1, YMED6200KW0
Key Features
- XPARTCO aftermarket replacement for Whirlpool W10861225
- White plastic construction — matches OEM color and finish
- Same snap-tab mounting — clicks directly into the door slot
- Dimensions: 5¾" × 1⅞" — identical to the original handle
- Fits seven compatible brands across electric and gas dryer platforms
- No tools required — installs in under 5 minutes
Specifications
| Part Number | XPW10861225 |
| OEM Part Number | W10861225 |
| Condition | Aftermarket |
| Brand | XPARTCO |
| Part Type | Dryer Door Handle |
| Appliance Type | Dryer |
| Color | White |
| Material | Plastic |
| Dimensions | 5¾" × 1⅞" |
| Compatible Brands | Whirlpool, Maytag, Kenmore, Crosley, Amana, Roper, Inglis |
| Supersedes | W10714516 |
No electrical disconnection is required — the handle is an external snap-in component with no wiring. Before pressing the new handle into the mounting slot, check that no broken plastic from the old snap tab is lodged inside the slot. Debris in the slot can prevent the new handle from locking and may crack the replacement tab if forced.
Frequently Asked Questions
Which dryer brands use this handle?
Whirlpool manufactures dryers sold under the Whirlpool, Maytag, Kenmore, Crosley, Amana, Roper, and Inglis brand names on shared platforms. Many of these models use the same door panel and the same handle. If your dryer's parts lookup shows W10861225 or W10714516 as the handle part number, this replacement fits regardless of the brand name on the front of the machine.
How do I install the new handle?
Pull the old handle out of the mounting slot on the front of the dryer door. If it is broken, pull the remaining piece and use needle-nose pliers to remove any snap-tab fragments from inside the slot. Align the new XPW10861225 with the slot and press it in with your thumb until the snap tab clicks into place. Test by pulling the door open — the handle should hold firmly with no wobble.
My Kenmore dryer model number starts with 110 — does this handle fit?
Many Kenmore dryers with model numbers beginning with 110 are built by Whirlpool on the same platform as the Whirlpool WED and WGD series. If a parts lookup for your specific Kenmore model number returns W10861225 as the handle, this XPARTCO replacement is the correct fit. Always confirm with your exact model number, since the Kenmore 110 prefix covers a wide range of machines.
Is this handle the same for electric and gas dryers?
Yes. On Whirlpool-built dryer platforms, the electric version (WED, MED, NED) and the gas version (WGD, MGD) share the same door panel and the same handle. The difference between electric and gas is in the heating system at the back of the machine — the door assembly and handle are identical.
What if the new handle still feels loose after snapping in?
If the handle does not click firmly, check for debris in the mounting slot first. If the slot is clear and the handle still wobbles, inspect the slot opening itself — if the plastic around the slot is cracked or warped from heat or age, the slot may no longer hold any handle securely. In that case, the door panel may need replacement rather than just the handle.
XPARTCO aftermarket replacements built to match original specifications. Fast shipping, straightforward returns, and real part support from people who know appliances.
Share
