XPARTCO
WR60X10220 Refrigerator Condenser Fan Motor WR60X10133, 197D1871P026
WR60X10220 Refrigerator Condenser Fan Motor WR60X10133, 197D1871P026
Couldn't load pickup availability
XPARTCO WR60X10220 Refrigerator Condenser Fan Motor
115V AC condenser fan motor for select GE and Hotpoint refrigerators.
Product Description
The XPARTCO WR60X10220 Refrigerator Condenser Fan Motor circulates air across the condenser coil and compressor area while the compressor is operating. Proper airflow helps remove heat from the refrigerant, cool the compressor, and evaporate water collected in the drain pan.
This is a quality XPARTCO aftermarket replacement part designed for select GE and Hotpoint refrigerators.
Quick Answer
WR60X10220 is a 115V AC refrigerator condenser fan motor that replaces WR60X10133, WR60X10171, and WR60X10192 on compatible models. Verify the complete refrigerator model number, connector, mounting arrangement, and motor rotation before ordering.
Common Problems This Part May Fix
- Condenser fan does not run
- Refrigerator or freezer is too warm
- Compressor area becomes excessively hot
- Refrigerator runs longer than normal
- Clicking, buzzing, rattling, or grinding near the compressor
- Drain-pan water does not evaporate normally
Replaces and Cross-References
Cross-reference numbers are provided for identification. XPARTCO is an aftermarket replacement brand and is not manufactured by GE.
Compatibility
Designed for select GE and Hotpoint refrigerators. Compatible model examples include:
Important: This is only a partial compatibility list. Similar fan motors may use different voltages, plugs, shafts, brackets, blades, or rotation directions. Confirm the complete refrigerator model and original motor number before purchase.
Key Features
- Quality XPARTCO aftermarket replacement
- 115V AC condenser fan motor
- Moves air across the condenser coil
- Helps cool the compressor and refrigerant
- Supports drain-pan water evaporation
- For select GE and Hotpoint refrigerators
Product Specifications
| XPARTCO Part Number | WR60X10220 |
| Brand | XPARTCO |
| Part Type | Refrigerator Condenser Fan Motor |
| Condition | New |
| Part Quality | Aftermarket Replacement |
| Rated Voltage | 115 Volts AC |
| Application | Refrigerator Condenser Compartment |
| Package Quantity | One Fan Motor |
Troubleshooting Guide
- Unplug the refrigerator before removing the rear service panel.
- Inspect the condenser coil and fan blade for dust, debris, or obstruction.
- Confirm the fan blade rotates freely and is not contacting the shroud.
- Check the motor wiring and connector for loose, burned, or damaged terminals.
- Verify proper voltage is supplied to the motor while the compressor is running.
- Inspect the fan blade and mounting bracket and transfer them when required.
Diagnostic note: Warm temperatures may also result from dirty condenser coils, sealed-system problems, a failed compressor, control-board faults, door-gasket leaks, or poor airflow elsewhere in the refrigerator.
Frequently Asked Questions
Is XPARTCO WR60X10220 a Genuine GE OEM part?
No. It is a quality XPARTCO aftermarket replacement for compatible GE and Hotpoint refrigerators.
What does the condenser fan motor do?
It moves air across the condenser coil and compressor area to remove heat and help the refrigerator cool properly.
Does this motor replace WR60X10171?
Yes, WR60X10171 is a listed cross-reference for WR60X10220 on compatible models.
Is the fan blade included?
The listing is for one condenser fan motor. Reuse or replace the fan blade and mounting hardware according to the appliance configuration and package contents shown in the product photos.
Shop With Confidence
Verify the complete refrigerator model and original motor number before ordering. Our compatibility team can help determine whether XPARTCO WR60X10220 is correct for your appliance.
Share
