XPARTCO
DC97-15459H Washer Water Valve AP5621731, PS4220862
DC97-15459H Washer Water Valve AP5621731, PS4220862
Couldn't load pickup availability
XPARTCO DC97-15459H Washer Water Inlet Valve
Aftermarket water inlet valve assembly for select Samsung top-load washing machines.
Product Overview
The XPARTCO DC97-15459H Washer Water Inlet Valve controls incoming water flow during the fill portions of compatible Samsung washer cycles.
This is a quality XPARTCO aftermarket replacement part designed to restore proper washer filling when the original valve is worn, restricted, leaking, or electrically defective.
Quick Answer
DC97-15459H is a washer water inlet valve assembly used on select Samsung top-load washers. It may help correct slow fill, no fill, inconsistent filling, unwanted water entry, or related 4E/4C/NF-style fill errors when the valve is the failed component.
Common Problems This Part May Fix
- Washer fills slowly
- Washer does not fill with water
- Water flow is weak or inconsistent
- Washer continues filling when it should stop
- Water enters the tub when the washer is off
- Fill-related 4E, 4C, or NF error conditions
- Original valve is leaking or electrically defective
Replaces and Cross-References
Cross-reference numbers are provided for identification. XPARTCO is an aftermarket replacement brand and is not manufactured by Samsung.
Compatibility
Designed for select Samsung top-load washers. Compatible model examples include:
Important: This is only a partial model list. Verify the complete washer model number and original valve assembly before purchasing because visually similar Samsung valves can use different ports, coils, connectors, or mounting arrangements.
Key Features
- Quality XPARTCO aftermarket replacement
- Controls incoming washer water flow
- Designed for select Samsung top-load washers
- Helps restore proper filling and cycle operation
- Direct replacement for DC97-15459H applications
Product Specifications
| XPARTCO Part Number | DC97-15459H |
| Brand | XPARTCO |
| Part Type | Washer Water Inlet Valve Assembly |
| Condition | New |
| Part Quality | Aftermarket Replacement |
| Application | Samsung Top-Load Washer |
| Primary Function | Controls water entering the washer |
| Package Quantity | 1 Valve Assembly |
Installation Notes
- Unplug the washer before service.
- Shut off both hot and cold water supply valves.
- Disconnect the inlet hoses and relieve any residual water pressure.
- Photograph the original hose, wire, and connector positions before removal.
- Transfer each hose and electrical connector to the matching location on the replacement valve.
- Inspect inlet hoses and screens for blockage, scale, or damage while the valve is accessible.
- Restore water pressure and check carefully for leaks before operating the washer.
Diagnostic tip: Fill problems can also be caused by closed supply valves, clogged hose screens, low household water pressure, damaged wiring, a pressure-sensing problem, or a control-board fault. Diagnose the complete fill system before replacing parts.
Frequently Asked Questions
Is this a Genuine Samsung OEM valve?
No. This is a quality XPARTCO aftermarket replacement designed for compatible Samsung washers.
Can a bad valve cause a 4E or 4C error?
Yes, a failed or restricted inlet valve can contribute to fill-related error conditions, but water supply, hose screens, pressure sensing, wiring, and controls should also be checked.
Can this valve cause the washer to fill while turned off?
Yes. If an internal valve seat does not close correctly, water can seep into the tub even when the washer is not running.
Will this fit every Samsung washer?
No. Verify the complete appliance model number because Samsung uses multiple different inlet-valve assemblies.
Shop With Confidence
Verify the complete washer model number and original valve part number before ordering. Our compatibility team can help determine whether XPARTCO DC97-15459H is correct for your appliance.
Share
