XPARTCO
(5 Pack) EXP20AG Glass Line Fuse, Fast Blow, 20A, 6x30mm
(5 Pack) EXP20AG Glass Line Fuse, Fast Blow, 20A, 6x30mm
Couldn't load pickup availability
(5 Pack) EXP20AG 6x30mm Glass Line Fuse, Fast Blow, 20A 250V
Fast-acting 6x30mm, 20-amp, 250-volt glass line fuse for select microwave ovens and compatible electrical equipment.
Product Description
The XPARTCO EXP20AG Glass Line Fuse is a fast-acting circuit-protection component that opens the circuit when current exceeds its rating. It is commonly used as a line fuse in select microwave ovens and compatible electrical equipment.
This is a quality XPARTCO aftermarket replacement part measuring 6x30mm and rated at 20 amps and 250 volts.
Quick Answer
EXP20AG is a 6x30mm, 20A, 250V fast-blow glass line fuse. Replace it only with a fuse that matches the original amperage, voltage, response speed, physical dimensions, and interrupting capacity.
Common Problems This Part May Fix
- Microwave or appliance has no power
- Display and controls remain blank
- Unit stopped after a surge or electrical fault
- Original fuse tests open
- Fuse element is visibly separated or burned
Replaces and Cross-References
Cross-reference numbers are provided for identification. Confirm all original fuse markings and the appliance model before ordering.
Compatibility
For select microwave ovens and electrical equipment requiring a 6x30mm, 20-amp, 250-volt, fast-acting glass line fuse. These cross-references are commonly associated with select Frigidaire/Electrolux microwave applications.
Important: Similar fuses can have different dimensions, response characteristics, or breaking capacities. Appearance alone does not confirm compatibility.
Key Features
- XPARTCO aftermarket replacement
- 6x30mm cartridge size
- 20-amp current rating
- 250-volt voltage rating
- Fast-acting / fast-blow response
- Glass cartridge construction
- Overcurrent protection
Product Specifications
| Part Number | EXP20AG-5PK |
| Brand | XPARTCO |
| Part Type | Glass Line Fuse |
| Condition | New |
| Quality | Aftermarket Replacement |
| Fuse Size | 6x30mm |
| Current Rating | 20 Amps |
| Voltage Rating | 250 Volts |
| Response Type | Fast Acting / Fast Blow |
| Package Quantity | 1 Fuse |
Troubleshooting Guide
- Disconnect the appliance from electrical power.
- Have a qualified technician safely discharge the microwave high-voltage capacitor.
- Remove and test the original fuse for continuity.
- Inspect for shorted door switches, damaged wiring, or failed high-voltage components.
- Do not repeatedly replace a fuse that blows again; diagnose the underlying fault.
High-voltage warning: Microwave ovens can retain a dangerous electrical charge even while unplugged. Professional service is recommended.
When Should You Replace This Part?
- The original fuse has no continuity
- The fuse element is visibly open
- The service procedure identifies a failed line fuse
- The cause of the failure has been diagnosed and corrected
Exact-Match Safety Requirements
- Match the 20A rating
- Match the 250V rating
- Match the fast-acting response
- Match the 6x30mm physical size and fuse holder
- Match the required interrupting capacity
- Never substitute a higher-amperage fuse
Shop With Confidence
Verify the original fuse markings and appliance model before ordering. Our parts team can help compare EXP20AG with the fuse required by your appliance.
Share
