Skip to product information
1 of 3

XPARTCO

XPARTCO 303836 Dryer Blower Wheel for Maytag Y303836, AP4294048, AWP50724

XPARTCO 303836 Dryer Blower Wheel for Maytag Y303836, AP4294048, AWP50724

Regular price $6.50 USD
Regular price $19.50 USD Sale price $6.50 USD
Sale Sold out
Shipping calculated at checkout.

XPARTCO 303836 Dryer Blower Wheel

The XPARTCO 303836 is an aftermarket replacement dryer blower wheel for select Maytag, Jenn-Air and Whirlpool-built dryers, replacing Whirlpool parts 303836 and Y303836. The blower wheel attaches to the drive motor shaft and pushes air through the drum and out the exhaust vent. When it is worn or damaged, the dryer may be noisy, may dry slowly, or may not heat properly.

Measures approximately 7-1/2" in diameter and 3-3/8" wide. Similar blower wheels can differ in size and shape between dryers, so check your model number before ordering.

Quick Answer

The XPARTCO 303836 Dryer Blower Wheel replaces the blower wheel on a compatible Maytag, Jenn-Air or Whirlpool-built dryer when it is worn or damaged. Replaces 303836, Y303836, 3-3836, 312913 and Y312913. Classic symptoms: loud or unusual noise, long drying times, or poor airflow. Other parts can cause the same symptoms.

Common Problems This Part Fixes

  • Unusual or loud noises from the dryer
  • Takes too long to dry, or not drying properly
  • No heat or not enough heat
  • Worn or damaged blower wheel

Cross Reference Information

Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.

Replaces Part Numbers

This blower wheel directly replaces the following part numbers:

Y303836, 1245880, 3-12913, 3-3836, 303836, 312913, Y312913, AH2200270, AP4294048, AWP50724, EA2200270, K35-239, PD00002423, PS2200270

If your old blower wheel shows a different number, contact our support team and we'll check whether it matches.

Compatibility

This blower wheel is listed for Maytag, Jenn-Air and Whirlpool dryers and washer/dryers, including these examples:

  • Maytag LDE9206ACM, LDG8824AAM, LDG9314AAM, LDE9804ACL
  • Maytag LDE8424ADE, LDG7304ABL, LDG7314AAE, LDG5005AAE
  • Jenn-Air LSE2700W, LSG2700W

Note: The models above are a small sample of the roughly 100 that retailers list. It fits only some models of each brand. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering.

Key Features

  • Aftermarket replacement for the Whirlpool Y303836 blower wheel
  • Attaches to the drive motor shaft to move air through the drum and out the exhaust vent
  • Approximately 7-1/2" in diameter and 3-3/8" wide
  • Replaces several earlier Whirlpool blower wheel numbers

Product Specifications

Part Number 303836
OEM Part Number Y303836
Part Type Dryer Blower Wheel
Condition Aftermarket Replacement
Diameter Approx. 7-1/2"
Width Approx. 3-3/8"
Quantity 1 Blower Wheel
Application Select Maytag, Jenn-Air & Whirlpool Dryers

Installation Notes

⚠️ Unplug Power Before Installing Unplug the dryer before you begin, and wear work gloves. Reaching the blower wheel usually means taking apart the front of the dryer, including the duct assembly, so keep track of the screws and take care not to disturb the wiring harness. The wheel is held on the motor shaft by a clip and a clamp, and installers recommend using a new clamp and checking clearances before closing the dryer. Restore power and test the dryer.

Frequently Asked Questions

My dryer is noisy or slow to dry. Is this the part I need?

It can be, if the blower wheel is damaged or loose on the shaft. Other parts, such as the motor, belt or vent, can cause the same symptoms, so confirm the blower wheel is the problem before replacing it.

Is this an OEM or aftermarket part?

This is an aftermarket replacement from XPARTCO, made to replace Whirlpool parts 303836 and Y303836. If you specifically need a genuine Whirlpool part, contact our support team.

Does this include the clamp?

A clamp holds the wheel on the motor shaft, and installers recommend using a new one. Retailers sell the clamp as a separate part, so contact our support team if you need help choosing the right clamp for your model.

Will this fit my dryer?

It fits only some models of each brand, and the model list above is only a sample. Similar blower wheels can differ in size and shape, so check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.

Shop With Confidence

A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.

✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
View full details